A STUDY OF THRUST FORCE IN DRILLING OF EN-8 STEEL USING FACTORIAL DESIGN

Authors

  • Arvind Sharma1, Kulbhushan Bhagat2 1 M. Tech student in Manufacturing & Industrial Engineering, Suresh Gyan Vihar University, Jagatpura, Jaipur 2 Assistant Professor, Suresh Gyan Vihar University, Jagatpura, Jaipur

Abstract

Drilling is one of the most common and fundamental machining processes. Metal machining has been an interesting topic of research for decades.. The EN-8 steel is widely used as a main material in die making industries. A study of thrust force during drilling of EN-8 steel will be quite useful. In the present work the response surface methodology based two level full factorial design design has been selected for development of prediction models and optimization of drilling parameters for minimum thrust force. An effort has also been made to investigate the effect of drilling parameters on thrust force during drilling of EN-8 steel. Keywords: RSM, Analysis of Variance (ANOVA), Design of Experiments (DOE), EN-8 steel and Face Centered Design.

Downloads

Published

2015-10-30

How to Cite

Kulbhushan Bhagat2, A. S. (2015). A STUDY OF THRUST FORCE IN DRILLING OF EN-8 STEEL USING FACTORIAL DESIGN. International Journal of Engineering Technology and Computer Research, 3(5). Retrieved from https://www.ijetcr.ijmbs.info/index.php/ijetcr/article/view/254

Issue

Vol. 3 No. 5 (2015)

Section

Articles

License

Creative Commons LicenseInternational Journal of Engineering Technology and Computer Research (IJETCR) by Articles is licensed under a Creative Commons Attribution 4.0 International License.